LTP Colour Intensifier and Stainblock H2O

LTP Colour Intensifier and Stainblock H2O is for all types of natural and artificial stone, quarry, brick, concrete and paving. Honed, rough cut and polished surfaces. Colour enhancing water based impregnating sealer. Provides an enhanced natural finish. Helps protect against staining. Strongly repels water, oil and grease. Allows surface to breathe. Helps reduce efflorescence.

• Water Based Impregnating Sealer
• Eco friendly – low odour
• For interior & exterior use

Directions for Use:

Preparation: Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of LTP Grimex 1:10 and white nylon scrubber. Rinse well to remove residues and leave to dry (24hrs).

Rough cut, tumbled, textured or riven surfaces: Shake bottle before use. Apply generously and evenly using foam roller or paint brush. On more absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated.

Honed, smooth and polished surfaces: Shake bottle before use. Apply liberally and evenly using a sealant applicator, lint free cloth, lamb’s wool applicator or sponge. Leave surfaces to dry. Remove any residual sealer if still visible after one hour by rubbing the surface with a microfibre cloth. On larger surface areas machines can be used. On vertical surfaces apply from the bottom up.

Aftercare:

• Routinely sweep and wash the floor.
  Clean floors with LTP Waxwash
• Clean walls and work surfaces with LTP Stonewash

Storage Information:

• Store in a cool, dry, frost-free environment.
• Shelf Life – Up to 2 years for un-opened containers.

TIPS: Environmentally safe water based impregnating sealer. Clean brushes with water.

Downloads:

• LTP Colour Intensifier and Stainblock H2O Tech Data Sheet Jan 2022