LTP Cement Grout & Salt Residue Remover

LTP Cement Grout & Salt Residue Remover is a rapid action cleaning agent for removing cement residues, grout stain, salts, efflorescence and other similar deposits. May also be used in dilute or concentrated form. Ideal for use on all types of unpolished natural stone can also be used on porcelain, glazed ceramic, slate, quarry tiles, brick, terracotta and granite.

• For all types of Unpolished Natural Stone
• For Interior & Exterior use
• Acid Replacement Technology
• Does not tarnish chrome or steel
• Removes Efflorescence

Directions for Use

Always test/practice on an inconspicuous area before proceeding to ensure that the finished result is satisfactory.

Shake container well before use.

In mild cases and on non-absorbent surfaces: Dilute 1 part in 4 parts cool water. Apply with a cloth or sponge wrung out in the solution. Leave for up to 15 minutes. Extract released residues using a sponge and water.

In more severe cases: Dilute 1 part in 1 part cool water. Apply liberally and spread over surface. If necessary, agitate with a nylon scrubber, scrubbing brush or rotary scrubbing machine and leave to react for 5-10 minutes, keeping surfaces wet with additional LTP Cement, Grout & Salt Residue Remover solution. Extract and rinse thoroughly with clean water.

In extremely severe cases: Dampen the surface to be cleaned with water and apply undiluted. Agitate with a nylon scrubber, scrubbing brush or
mechanical scrubber. Immediately extract and rinse thoroughly with clean water.

N.B. Always rinse surfaces thoroughly with cool clean water.

Storage Information

• Store in a cool, dry, frost free environment ideally at 5 – 25°C
• Shelf life up to 2 years if container is unopened.

 

Downloads:

• LTP Cement Grout and Salt Residue Remover Feb 2021